De PM3319 is het model onder het hoogste model. Deze uiterst nauwkeurige en super snelle combi oscilloscoop met 4 kanalen is het geavanceerde model waarop u zit te wachten. Een echte analoge en een digitale oscilloscoop in 1 met specificaties die u graag bij een oscilloscoop wilt zien. De bandbreedte is groter dan 1GHz en de sample rate voor herhalende signalen is zelfs 100GS/s. De beeldbuis is er voor om een echt analoog signaal weer te geven en voor de LCD liefhebbers is er de mogelijkheid om een LCD monitor op deze combi oscilloscoop aan te sluiten. Op de voorkant is er natuurlijk een aansluiting voor een USB stick gemaakt. Er is ook een nieuwe USB 3.0 interface aangebracht voor een heel snelle verbinding met uw computer. Deze oscilloscoop komt in 2012 in de winkels te staan en wordt onder een nieuwe merknaam verkocht.


ANALOG MODE

Display modes:
CH1, +/- CH2, CH3, +/- CH4, Add, Subtract; Alternate or chopped automatically selected.
Main Timebase (MTB).
Delayed Timebase (DTB).
Alternate Timebase (= MTB and DTB).
X-Y mode.

Specifications:
Bandwidth: > 1 GHz.
Rise time: < 350 ps.
Vertical deflection: 1 mV/div..... 10V/div. in a 1-2-5 sequence.
MTB: 1 s/div..... 500 ps/div. in a 1-2-5-sequence.
DTB: 1 ms/div... 500 ps/div. in a 1-2-5 sequence.
Input impedance all channels: 1 MOhm ± 1% 15 pF ± 2 pF and user selectable 50 Ohm ± 1%.

Input coupling:
AC, DC, GND.

Edge triggering:
MTB trigger source: CH1.... CH4, Line, External trigger input, Line.
DTB trigger source: Starts after delay or triggered on any channel or on External Trigger input.
Slope: Positive (+), Negative (-).
Trigger gap: 0.4 div., user selectable 0.8 div. for triggering on noisy signals.
Trigger bandwidth and sensitivity: 1.2 GHz 2.0 div., 1 GHz 1.2 div., 700 MHz 0.6 div.

X-Y Mode:
X-deflection source: CH1.... CH4, Line.


DIGITAL MODE

Display modes: CH1, +/- CH2, CH3, +/- CH4; Calculated Add and Subtract.
Main Timebase (MTB).
Delayed Timebase (DTB).
Alternate Timebase (= MTB and DTB).
X-Y mode.
FFT mode.

Specifications:
Repetitive Sample Rate: 100 GS/s
Single Shot Sample Rate 10 GS/s
Bandwidth: 1 GHz
Timebase sampling: 200 s/div..... 500 ps/div.

Input coupling:
AC, DC, GND.

Acquisition modes:
Recurrent (Auto and Triggered), Single Shot, Multiple single shot (as part of Math+ option), Roll, Triggered Roll. User selectable AUTO-RANGING timebase in recurrent modes.

X-Y mode:
X-source: any trace in memory or any of the input channels.

Calculated measurements:
General: Measurements can be performed over a complete record or within a cursor limited area. Statistics mode provides minimum, mean and maximum measurement result per measurement.
Volt: DC, RMS, Minimum, Maximum, Peak to Peak, Low level, High level, Overshoot (pos. or neg.), Preshoot (pos. or neg.).
Time: Frequency, Period, Pulsewidth, Rise time, Fall time, Duty cycle.
Delay: Between channels; Rising and falling edges independently selectable.
Quick Measurement: Probe mounted ”Command Switch” operates ‘Touch, Hold and Measure’, giving calculated measurements of frequency, VDC, VRMS and Vpkpk.


TRIGGERING

Trigger modes: Auto free run, Triggered, Single, Edge triggering, TV Triggering.

TV Triggering:
Video standard: NTSC, PAL, SECAM, HDTV.
Signal polarity: Positive or negative video.
Sensitivity: 0.7 div. (amplitude of sync. pulse).

Logic triggering modes: State, Pattern, Glitch


CURSOR MEASUREMENTS

Cursor modes and Read-out:
Vertical: dV, V1 to ground, V2 to ground, ratio.
Horizontal: dT, 1/dT (in Hz), ratio, phase.
Horizontal and vertical cursors can be used together.


GENERAL

Interfacing:
DVI-I/XVGA
USB stick
USB 3.0
1 Gb/s ethernet
RS-232

Hardcopy:
Printers: HP LaserJet compatibles, HP DeskJet compatibles.
Plotters: HP standard HPGL.


POWER SUPPLY

Line voltage: 100.... 240V (± 10%).
Line frequency: 50.... 400 Hz (± 10%).
Power consumption: 145 W.


MECHANICAL DATA

Fan: Proportionally regulated forced air.
Width x Height x Length:
Excluding handle and feet: 341 x 139 x 481 mm, (13.4 x 5.5 x 18.9 inch).
Including handle and feet: 391 x 147 x 551 mm, (15.4 x 5.8 x 21.7 inch).
Weight: 9.5 kg = 21 lb.


STANDARD ACCESSORIES

Two 10:1 probes with read-out and command switch, supporting full bandwidth and command switch.
Operating guide.
Reference manual.
Front cover.
Power cord.
Guide to mathematic functions and SCPI/IEEE manual when applicable.
Two LR-6 (AA-size) batteries.
Free service manual upon request.
Software: IBIS, Spice simulation converter.




ADVIESPRIJS: E19745,-



Om dit mogelijk te maken, kan iedereen een enthousiaste reactie zenden naar of contact opnemen met:

Benchmark Electronics BV
Lelyweg 10
7602EA Almelo
The Netherlands
+31 (0)546-535111

Stichting Oscilloscoop Nederland (SON+)